• (573) 581-8200
  • sales@fluidpowersupport.com
Facebook-f Linkedin-in Instagram Youtube
fps_fluid_power_support_logo_transparent
REQUEST A QUOTE
fps_fluid_power_support_logo_transparent

Individual Metal Finishing

Get a custom quote today. Industry's shortest lead times.

GET A CUSTOM QUOTE TODAY

Overview

Individual metal finishing is all about getting the details right on the parts that matter most. Instead of treating every surface the same, individual metal finishing focuses on specific faces, edges, and features that need extra attention for appearance, protection, or performance.

Individual metal finishing is a good fit when only certain areas of a part are visible to the end customer, must be protected, or need a particular finish while other areas can remain functional and uncoated. That can include cosmetic faces, mounting flanges, interfaces, and features that must stay clean, sharp, or free from coating.

Advanced expertise & equipment

As a full-service fabrication and finishing provider, we combine metal finishing experience with the right equipment to deliver consistent individual metal finishing results.

Our individual metal finishing capabilities include:

  • Masking and protecting critical fits, threads, and mating surfaces
  • Focusing powder coating and prep on specific cosmetic faces or visible areas
  • Coordinating abrasive blasting and powder coating as part of an overall finishing plan
  • Handling parts from small components to larger weldments where only certain faces need individual metal finishing
  • Integrating individual metal finishing with cutting, forming, welding, machining, and assembly

 

We know the power of quality.

We synchronize our precision metal work with the highest quality of customer service, while using state-of-the-art technologies that provide customized metal fabrication solutions to fulfill our customer needs.

REQUEST A QUOTE

Other Ways We Can Help

Get Connected on Social Media

Facebook-f Youtube Linkedin Instagram

High-quality, cost-effective projects
on industry's shortest lead times.

"These guys are absolutely amazing. Had my patio furniture redone. They were fair priced and fast. Further, their powder coat finish is all but bullet proof. I only had a few ratchet straps and packing blankets with me when I picked up my furniture and was concerned it would be scratched up after the 45 highway drive home. Nope! Not a scratch. Thanks for a job well done."
JOHN SWAN
"Had them gloss black powder coat my wheels they did a great job and very quick on there turn around time. I am very happy with the work they did and would definitely recommend them for your powder coat needs."
CHRIS MILCIK
"Amazing work, state of the art facility, and professional owners and staff that get you what you need, on time and perfect. Line handles big orders, parts cut, folded, welded all in one place."
AL BELCHER

Made in Missouri,
Projects across the world.

We are pleased to announce that we are a part of the Made in Missouri USA Program sponsored by the Missouri Association of Manufacturers and the Missouri Buy MO Program, sponsored by the Office of the Governor Mike Kehoe. Both Programs are designed to showcase and support all the incredible and unique products made by Missouri manufactures and business.

world_map_transparent_made_in_missouri_ (1)

Ready to get started with a project?

We respond quickly with clear pricing, lead times, and any recommendations that could improve cost, manufacturability, or performance.

GET A CUSTOM QUOTE TODAY

Frequently asked questions

What is individual metal finishing?

Individual metal finishing is a focused finishing service that applies prep, masking, and coating only where it is needed on a part. Instead of finishing every surface the same, individual metal finishing targets specific faces, edges, and features for coating or protection while keeping functional areas clean, open, or uncoated.

Individual metal finishing is a good choice when:

  • Only one side or a few faces of a part are visible to the customer
  • Critical threads, bores, or mating surfaces must stay uncoated
  • You have mixed cosmetic and purely functional surfaces on the same part
  • You need consistent appearance or protection on a specific face without over-treating the entire component

 

General metal finishing tends to treat the entire part the same; individual metal finishing is more targeted.

Individual metal finishing works well on:

  • Brackets and plates with one visible “front” face
  • Welded frames and structures where only certain sides are seen or exposed
  • Parts with machined faces, threads, or fits that must remain uncoated
  • Components that will be assembled into a product where only select surfaces need a cosmetic finish

If you are not sure, you can send a marked-up drawing or photo and we can help identify where individual metal finishing makes sense.

The best ways to communicate individual metal finishing requirements are:

  • Mark cosmetic faces and keep-out areas on your drawings
  • Use simple labels such as “finish this face” or “do not coat” on specific surfaces
  • Provide a brief note describing which sides are visible after assembly

 

Clear communication up front helps make individual metal finishing consistent from batch to batch.

Yes. Individual metal finishing commonly includes:

  • Masking threaded holes and studs
  • Plugging or capping bores and critical fits
  • Taping or blocking off flanges and sealing faces
  • Protecting labels, nameplates, or alignment marks

 

Masking is a key part of making sure only the right areas receive blasting or coating.

Individual metal finishing often works together with powder coating. For example:

  • Abrasive blasting might be focused on the faces that will be powder coated
  • Specific faces may be masked during powder coating to keep them free of coating
  • Cosmetic faces receive a uniform powder coat finish while other surfaces remain functional and uncoated

When you request individual metal finishing, you can also specify whether you want powder coating, blasting, or both.

Yes. Individual metal finishing is frequently used on small batches and mixed part sets where each part has unique cosmetic or keep-out requirements. You do not need a large minimum order to request individual metal finishing.

Pricing for individual metal finishing depends on:

  • Number of parts and repeat frequency
  • Size and complexity of the parts
  • How many surfaces must be masked or specially handled
  • Whether blasting, powder coating, or both are required
  • Handling needs to protect cosmetic faces during processing and packing

We can often recommend ways to simplify marking, masking, or surface requirements to keep individual metal finishing cost-effective.

For technical projects, preferred file types are: DXF, DWG, STP and PDF.  

These formats make it easier to understand geometry and clearly indicate which faces need individual metal finishing. For simpler parts or refinish work, labeled photos plus basic dimensions can be enough to get started.

Yes. Individual metal finishing can be one step in a complete workflow where we:

  1. Laser cut and form parts
  2. Weld and machine assemblies
  3. Apply abrasive blasting and powder coating with individual metal finishing attention to key faces
  4. Package and label parts for installation or assembly

 

Combining fabrication and individual metal finishing under one roof helps ensure cosmetic faces, critical fits, and functional areas all receive the correct treatment

To get started:

  1. Send drawings or photos and clearly mark cosmetic faces and keep-out areas.
  2. Share material, approximate size, and quantity.
  3. Note whether you need blasting, powder coating, or both as part of individual metal finishing.
  4. Tell us if parts are being fabricated by us or supplied by you.
  5. Provide your target delivery date and whether you expect repeat work.

 

We will respond with an individual metal finishing quote and lay out the best approach for both first-time and repeat projects